Ask Experts Questions for FREE Help !
Ask
    dancrz's Avatar
    dancrz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2009, 05:20 PM
    Delta Shower Cartridge replacement
    How to replace Delta Shower Cartridge
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Feb 11, 2009, 07:27 PM

    Uhhh.. Details? Model? Description? Problem? Have you tried anything yet? If you can't do anything else, remove the handle and take some pictures. Resize to reasonable and post.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Feb 11, 2009, 08:26 PM

    Take the old one out and put the new one in. Haa. But really, you should be able to shut water off to house, remove cartridge(just remember how you took it apart) take all parts to a plumbing parts store, ask them for new parts, reinstall, turn water back on, and presto, it leaks worse than before.


    Ok, ill be serious now. If you can do as EPMiller suggested, we may be able to give you step by step advice.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Feb 11, 2009, 08:59 PM

    If you post the model number as EPMiller and Mygirlsdad are asking or post a picture of the faucet.Thanks.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Delta Shower Cartridge [ 15 Answers ]

Good AFternoon, I am replacing a 13 year old Delta shower cartridge and I am at the point of removing the cupling holding the old cartridge on. The directions state to "unscrew" the cupling and remove it and then pry out the old cartridge. I have tried to uunscrew the brass cupling but when I...

Delta bath cartridge removal [ 3 Answers ]

I have a single handle Delta bath faucet valve whose cartridge needs to be replaced because it is dripping. It is about 4 years old or so. I can find no part number anywhere on it. I got all the parts removed, down to removing the brass collar that holds the cartridge in place. NO GO! I put a...

Shower Cartridge replacement halted due to stripped screw set. [ 2 Answers ]

Need assistance! I am in the process of replacing a shower cartridge but this project has been halted at it's first step removing the handle to obtain access to the cartridge. I have tried various things all of which has had the unfortunate event of stripping the screw set head so that there isn't...

Replacing Delta shower cartridge [ 3 Answers ]

I have a shower with a Delta single knob that you turn to the left to make the water go from cold to hot. Only one knob. This is a stand up shower, no tub. I don't know the Delta model #. It was dripping constantly so I called a plumber and he came and changed out the cartridge. Now, I don't...

DELTA shower trim replacement [ 11 Answers ]

I have delta shower single lever controls from 1989 with the knob handle. They have the rectangular cam with the ball with 3 holes and 3 copper tubes to valve. The diverter is on the spout. What trim kits are available for this as I don't want to change the rough in valve? Do I change the...

View more questions Search