 |
|
|
 |
New Member
|
|
Feb 9, 2009, 09:40 AM
|
|
Electrical Outlets
What is the standard height of an electrical outlet?
|
|
 |
Uber Member
|
|
Feb 9, 2009, 10:51 AM
|
|
There isn't one.
|
|
 |
Electrical & Lighting Expert
|
|
Feb 9, 2009, 02:37 PM
|
|
In an existing house it's the same as all the others.
I'd say 12"-18" is average.
|
|
 |
Uber Member
|
|
Feb 9, 2009, 02:46 PM
|
|
18" to the center is common, but it is more accurate to mark at 20" and have top of 4" box at the 20" mark.
If remodeling, maintain the same as existing,
As well as horizontal/verticle.
|
|
 |
New Member
|
|
Feb 9, 2009, 03:26 PM
|
|
There is no standard height for receptacles in a dwelling. 16" from floor to top of rough in box is normal in new construction. Receptacles above countertops are generally placed at 48" from floor to top of box to avoid backsplashes. Note that code requires receptacles on regular wallspace to be not more than 66" from floor and receptacles above countertops to be not more than 20" from countertop to meet wall space requirements.
|
|
 |
Electrical & Lighting Expert
|
|
Feb 9, 2009, 03:58 PM
|
|
 Originally Posted by TWSElectricJim
16" from floor to top of rough in box is normal in new construction. Receptacles above countertops are generally placed at 48" from floor to top of box to avoid backsplashes.
While these are the same numbers I use, I would not nearly call them "normal".
Ask 20 professional electricians this same questions and you'll get 15 different answers.
|
|
 |
New Member
|
|
Feb 9, 2009, 04:14 PM
|
|
According to code, I believe it's about a foot from the floor to the bottom of the box. I may be wrong, though.
|
|
 |
Electrical & Lighting Expert
|
|
Feb 9, 2009, 04:21 PM
|
|
 Originally Posted by Natev2
According to code, I believe it's about a foot from the floor to the bottom of the box. I may be wrong, though.
The code has already been stated. Keep in mind this is for required receptacles ONLY. Once code minimum has been met you can put them where ever your heart desires, including the ceiling.
Here:
 Originally Posted by TWSElectricJim
Note that code requires receptacles on regular wallspace to be not more than 66" from floor and receptacles above countertops to be not more than 20" from countertop to meet wall space requirements.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Electrical outlets
[ 3 Answers ]
Electrical outlets will not work but show they do with an electrical tester
>Moved from Forum Help<
Electrical Outlets
[ 3 Answers ]
I'm afraid that I have a cat that likes to spray it's territory and sometimes it does it on the electrical outlets. Of course, then you see sparks from the wire getting wet. Is there anything I can do to stop the sparks without having to turn the power off (one outlet switch also goes to the fridge...
Electrical Outlets Not Working
[ 1 Answers ]
I recently started updating outlets in my home. Three of them in the livingroom don't work. Actually one does, just the top plug. Interesting enough, this particular outlet has two ground wires instead of one like all the other outlets in the house. The outlets have two black and two white wires....
Electrical Outlets in the bathroom
[ 4 Answers ]
I have two separate bathrooms at opposite ends of the house. The plug-ins have been work find until this week. They both have the test and reset buttons on the front of them. One is red and the other one is black. I have checked the buttons. They are fine. I have pushed the rest button and it...
Electrical Outlets
[ 1 Answers ]
I have two outlets in my bathroom that supports a washer and dryer. One out is a reset outlet and the other is a normal standard outlet. I replaced both and only the reset outlet is working. How come the standed outlet has no power? The white and black wires are connected correctly.
View more questions
Search
|