Ask Experts Questions for FREE Help !
Ask
    xyz0041's Avatar
    xyz0041 Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2009, 09:50 AM
    Furnace or thermostat ?
    Equipment: Central heating and Honeywell thermostat.
    Set up: Evening: 55F; Day: 70F.
    Problem: The furnace always stops at temp. 63F. Changing temp. does not help. But turn off, then turn on power, the furnace will work again and work very well.
    What's wrong? Furnace or thermostat? What can I do?
    Thanks

    Ye
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 3, 2009, 11:13 AM
    Brand of furnace?
    Exact model number of furnace?
    Exact model of Honeywell thermostat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:

Thermostat or furnace [ 2 Answers ]

hello, I have a hunter thermostat 4155c. It's been working fine for over a year now. However, recently my furnace stopped automatically coming on. If I turn it on it will come on, the fan will blow. Also if I shut it off and turn it on it will come on automatically x1 then no more. Is it my...

Gas furnace thermostat [ 1 Answers ]

I've got a gas log fire place that can only be on or off, but I would really like to connect a thermostat to it so that it can control its self. Seems like I would just need to connect the thermostat so that it is wired into the on/off wires of the fire place, Right? I'm not sure what I would...

Furnace thermostat [ 1 Answers ]

Our heater is working because the house is not too cold. We cannot adjust the thermostat manually. The red light goes on but we can't move the temperature higher or lower. We had a power surge a few days ago and since then we have had a problem. A repairperson is coming today. I would like to...

View more questions Search