Ask Experts Questions for FREE Help !
Ask
    dcaed's Avatar
    dcaed Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2009, 12:06 PM
    How to prime X-troll wx#202 water well?
    My home has a model of X-troll wx#202 water well that stop pumping after last hurrican.
    the hose became strangely flat, some body told me air in the pipe prevent pump from working that I have to find how to prime the well?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Feb 1, 2009, 07:37 AM

    The X-trol WX202 is a pressure tank, not a pump. As such, it does not need priming. Is your pump above ground or below ground?
    dcaed's Avatar
    dcaed Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 2, 2009, 09:25 AM
    [QUOTE=jlisenbe;1520793]The X-trol WX202 is a pressure tank, not a pump. As such, it does not need priming. Is your pump above ground or below ground?
    Thank you, it's above ground.
    dcaed's Avatar
    dcaed Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Feb 2, 2009, 09:27 AM

    It is above ground
    robertTrout99's Avatar
    robertTrout99 Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Jul 3, 2011, 08:37 PM
    How to prime Welxtrol
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #6

    Jul 4, 2011, 07:04 AM

    Not real sure what you are asking. If you are asking how to prime a jet pump (above ground), then turn off the power and remove the plug or pressure gauge at the top of the impeller cage. Pour in water until it overflows. At that point, the water level in the cage should hold steady. Replace the plug/gauge and turn the power on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can't get water pump to prime [ 8 Answers ]

My pump motor seems fine but continues to run and no water comes out. I've tried to prime it and after pouring in the water, I can hold my hand over the hole and the suction is good but yet it will not allow the water to run in. Usually if you prime a pump, you can tell by the sound that it is...

How to prime my water pump? [ 1 Answers ]

How do I prime my water pump every time I prime it the gauge stays at 10 pressures so what do I do?

How do I prime my water pump? [ 2 Answers ]

Hello I live in a rental property with one water source that supplies 2 units. Our power went out today and now the water does not work. The pump will need to be primed now to get the water running again, but I'm not sure how to do that. I cannot get in touch with the landlord right now and I...

Water pump will not prime [ 2 Answers ]

My outside water pump will not prime. I loose prime every time the eltric goes out. Please help. I have no water.

Prime water pump [ 1 Answers ]

Please let me know how to prime a well water pump? Thank you, Luz

View more questions Search