Ask Experts Questions for FREE Help !
Ask
    sandygoodgirl's Avatar
    sandygoodgirl Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 28, 2009, 03:47 PM
    Clog between tank and bowl (possibly)?
    The toilet was totally clogged. We plunged and plunged and plunged and eventually I noticed that the plunging was pushing water and waste back up into the tank through the large hole that the flapper closes after a normal flush.

    So I went out and bought an auger and eventuallu was able to clear the clog so the bowl empties. But when I flush, large air bubbles come up through the pipe from the tank to the bowl, into the tank, and the water drains from the tank into the bowl too slowly to create the necessary whoooosh. If I pour water int the bowl directly, it flushes fine so I'm guessing some of the stuff that backed up when I tried to plunge is now clogged between the tank and bowl.

    How do I clear that clog - without taking anything apart!
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 28, 2009, 03:56 PM
    Hi Sandygoodgirl...

    1st... is the flexible hose (REFILL TUBE) from the fill valve (valve on left) connected to the flush valve overflow pipe (the valve on the right with the flapper). If this is not connected properly then the toilet could do what you describe.

    Otherwise, you could hook up a garden hose and stick the hose end into the flush valve (where flapper attaches) and turn the water on to see if that helps to clear the issue.

    If not, may be necessary to remove the toilet tank from the toilet bowl and see what you can do from there.

    Be sure to have a spray head to control the flow of water so things don't get out of hand.

    Let me know if it helps...

    MARK
    Attached Images
     
    drumerboy33's Avatar
    drumerboy33 Posts: 17, Reputation: 2
    New Member
     
    #3

    Jan 28, 2009, 06:59 PM

    It is very unlikely that the waste that was in the bowl, backed up into the tank, I've been doing plumbing a very long time and have never seen that.., although I have seen this problem your describing, the only way that the flush valve can get clogged is by something going through the flapper hole from the tank itself, such as a wash rag etc. but you may have to pull the tank off to remove whatever is in there, but before you do that, flush the water out of the tank, turn off supply valve, below tank.. and open up the flapper in the tank and stick a wire coat hanger down to see if you can feel or retrieve something..

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My bowl tank won't refill [ 1 Answers ]

Hi, I'm having a problem with my bathroom tank. The water suddenly stop flowing to it after I flush. Can someone point me to where I can start looking to see what the problem is?

Toilet leaking from tank to bowl! [ 5 Answers ]

I replaced stopper (flapper) but the toilet is still leaking. How do I fix this?:eek:

Toilet Bowl/Tank Fill [ 2 Answers ]

When we flush our toilet once the tank fills as does the bowl and we have an incomplete flush. The second flush fills the tank and empties the bowl completely, and the bowl does not refill, but the flush is complete. We have plunged, used unclogging chemicals, scraped rim feed holes, checked that...

Tank and bowl level both low [ 2 Answers ]

My son put a bunch of Kandoo wipes in the toilet a week ago. Everything was fine until yesterday, when I flushed and the toilet went just over the top of the bowl onto the floor, then drained slowly almost all the way out. Sometimes there's a little water left in the bowl, sometimes just toilet...

Toilet tank and bowl [ 3 Answers ]

My toilet when flushing is filling up the bowl and overflowing instead of emting the bowl- tried plunger - did not work? I hate to call a plumber if I can fix this myself Sheryl


View more questions Search