Ask Experts Questions for FREE Help !
Ask
    fixitms's Avatar
    fixitms Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2009, 07:45 AM
    Furnace shuts off and won't restart w/o out flippin switch
    My furnace seems to be working but when the thermostat reaches the desire temp set (new honeywell digital from a Lux) an shuts off it will not restart on its on, I have to restart it by flippin on the switch on the furnace to restart it. I'm not sure what the problem is, but some times just flippin the switch, the furnace will start but shuts off after a few minutes not even heating the house. Please help!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 26, 2009, 09:39 AM
    Brand of furnace?
    Exact model of furnace?
    Exact model of thermostat?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't restart [ 27 Answers ]

Furnace will not restart, when temp. drops. When you turn the furnace switch off and then on the furnace will restart. This will happen several times a day, if nobody is home for a while it can get pretty cold.

Furnace shuts down starts only after off switch [ 3 Answers ]

Our Furnace comes on and only runs for a minute or so... the first fan comes on and it sounds like water in the fan... we have a humidifier on side... then the blower fan comes on and it only runs for a few minutes.it doesn't get up to the tempter we set it too.( tried both.digital themo and old...

Furnace restart [ 3 Answers ]

I need to know how to prime or get started my 3 year old furnace. I already followed the instructions on the cover but it did not work. I get the piolit lit but the furnace does not kick in. do I need to run water or make sure it has water, and how do I do that?

Heater shuts off and won't restart [ 2 Answers ]

If I turn the thermostat up more than a few degrees, it shuts off after increasing one or two degrees and won't come back on. I can either turn the breaker off/on or, I just figured out, I can turn the thermstat down until it clicks and then back up again and it will come back on. But, it turns...

Furnace gas valve shuts off after unit is runnig won't restart [ 1 Answers ]

Furnace is a utica standing pilot gas unit I replaced the themocouple the boiler fired up. It seemed to be working but after running for awhile the gas valve shuts off and the boiler won't come back on. If I shut the gas turn off the pilot and relight the pilot the furnace kicks back on

View more questions Search