Ask Experts Questions for FREE Help !
Ask
    ronald osowski's Avatar
    ronald osowski Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 17, 2009, 03:08 AM
    Furnace stage 2 issue
    I have a Carrier 2 stage ,Hi efficiency furnace, about 10 yrs. Old. Works fine, until stage 2 of the blower kicks in. Then it always kills !
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 17, 2009, 04:01 AM
    Exact model number?
    ronald osowski's Avatar
    ronald osowski Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 17, 2009, 10:43 PM
    Carrier # 58MVP
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Jan 17, 2009, 11:00 PM
    Here is your manual

    http://www.xpedio.carrier.com/idc/gr.../58mvb-1pd.pdf

    I would be looking at the pressure switches. I believe that one is for the first stage and the other for the second stage.

    This is one of Carriers most complex units so I suggest getting a service man who is familiar with this product to do a On Site Service call to get it squared away. That is all I have on this unit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol Heat Pump 2 stage wiring issue [ 1 Answers ]

Hi There, The Janitrol heat pump in our newly purchased home has two stages of heating. Problem is that the first stage is the gas furnace, which makes for an EXPENSIVE start of the winter. The heat pump won't come on except in 55 plus degree heat calling, and even then, sporadically. Please...

Hvac1000: Or ing stage relays (multi-stage stats to single stage) [ 1 Answers ]

Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this...

2 stage furnace / single stage thermostat [ 1 Answers ]

I am having a Goodman 90,000btu 2 stage, variable speed 5 ton blower furnace put in. I am also have a 3 ton 16 seer A/C put in. They want to set me up with a Honeywell 4000 programmable thermostat. I thought that I read that this thermostat was for single stage heating. Am I getting short changed?...

2 wire Single Stage Thermostat Issue [ 1 Answers ]

Thought this would be easy, Here is the problem, the furnace stays on all the time even thought the programmable themostat is set at a lower temperature than the room. The wiring must not be correct but there are only 2 wires. One for the transformer and one for the heat control. Please...


View more questions Search