 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2 stage furnace / single stage thermostat
I am having a Goodman 90,000btu 2 stage, variable speed 5 ton blower furnace put in. I am also have a 3 ton 16 seer A/C put in. They want to set me up with a Honeywell 4000 programmable thermostat. I thought that I read that this thermostat was for single stage heating. Am I getting short changed? Thank you, Bill
|
||||
|
||||
|
Well if that is what you read then you are getting a single stage thermostat. Ask the dealer that is putting it in. He should be able to give you an answer.
Read this . A 2 stage heat http://customer.honeywell.com/techli...0s/50-9939.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
All wires match up except the RED wire (previously connected to "R") and the blue wire (previously connected to "C") on an manual white-rodgers thermostat (type 1f58w-58 2 stage heat/cool). On the programmable white-rodgers thermostat (type 1f78-151 single stage) I only have one open terminal and...
Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:
What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring...
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...
Thought this would be easy, Here is the problem, the furnace stays on all the time even thought the programmable themostat is set at a lower temperature than the room. The wiring must not be correct but there are only 2 wires. One for the transformer and one for the heat control. Please...
View more questions Search
|
