Ask Experts Questions for FREE Help !
Ask
    coolmen1's Avatar
    coolmen1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2009, 11:00 AM
    Limit switch
    Problem. Limit switch by pass limit switch run OK. Installed new switch runs two cicles blow out circuit braker. By pass limit switch runs OK.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 5, 2009, 11:33 AM
    Sounds like the unit has a problem and the limit/safety switch is working like it should.

    You need to find the REAL problem and not the symptoms of the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Limit switch [ 6 Answers ]

Okay short version furnace is running fine then smoke alarm goes off near cold air return and we smell smoke in that area. I go to the other end of house to the furnace and hear it running but its throwing a code (4 blinks) limit switch so I unplugged it. Yes I called the fire dept. but thy found...

Limit switch? [ 1 Answers ]

Blowers ignite then go out quickly. Limit switch?

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Limit Switch ? [ 1 Answers ]

My forced air electric furnace will not kick on when the temp drops to the thermostat setting.If I click on the fan all it does is blow cold air . My meter says its 135* but still no heat Please help !

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search