Ask Experts Questions for FREE Help !
Ask
    emawsantos's Avatar
    emawsantos Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2008, 10:32 PM
    Electrical Installation
    Do you have a lists of electrical equipments/materials about their Ratio of Manhour/unit?
    For example is the switchgear, 22kv, how long does it take for an average labor to install per panel? Thanks
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 30, 2008, 04:45 AM
    You will need to purchase an estimating book.

    Try
    RSMeans Book Search Result

    NECA | National Electrical Contractors Association

    Or do a web search for "electrical estimating labor units" and you will find many others.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical installation [ 1 Answers ]

Where can locked power panels be located? Where can normal power panel be located

Electrical installation of a Southwind V 110 690 [ 4 Answers ]

Hello, I recently purchased a Southwind V (model 110 690) ceiling fan. I've made countless attempts to search and also install the unit but with very limited success. Since it was for my son's room (he's 5) I'd like to attach the remote unit that the product came with, to enable him to turn...

Electrical Installation [ 2 Answers ]

Hi guys, I've just started a job in electrical design, so trying to broaden my knowlegde fast. I have a few questions How many sockets can I put on one circuit? i.e. Radial 13A, Is the area of the floor considered here? Same question with lights? How is cable sizing carried out? What...

Electrical installation [ 2 Answers ]

I am adding an addition to a house that will have a bedroom with outlets and lighting, and a kicthenette with only a refgrig and microvwave. Will a 50 amp breaker with #6 wire fed from the main 200 amp panel to a small sub panel be enough for this addition? Enough for a couple of 15 amp breakers...

Electrical installation [ 1 Answers ]

Hi my name is alfredo and I like to ask a question I need to install a sander machine that uses 480 volts my question is wich wire I need for 100 feet from panel to machine , thanks

View more questions Search