 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I recently purchased a Southwind V (model 110 690) ceiling fan. I've made countless attempts to search and also install the unit but with very limited success. Since it was for my son's room (he's 5) I'd like to attach the remote unit that the product came with, to enable him to turn...
Hi guys, I've just started a job in electrical design, so trying to broaden my knowlegde fast. I have a few questions How many sockets can I put on one circuit? i.e. Radial 13A, Is the area of the floor considered here? Same question with lights? How is cable sizing carried out? What...
I am adding an addition to a house that will have a bedroom with outlets and lighting, and a kicthenette with only a refgrig and microvwave. Will a 50 amp breaker with #6 wire fed from the main 200 amp panel to a small sub panel be enough for this addition? Enough for a couple of 15 amp breakers...
I'm installing a Bosch D/W and the genious who installed the earlier D/W cut the power line such that it is exactly the length needed to hook up the electrical which the D/W is pushed in and there is no slack. The Bosh D/W requires the new cable to follow a track in the bottom of the unit vs....
Hi my name is alfredo and I like to ask a question I need to install a sander machine that uses 480 volts my question is wich wire I need for 100 feet from panel to machine , thanks
View more questions Search
|
