Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace continues to heat after set temp
[ 6 Answers ]
My furnace will continue to run even though my set temp has been reached. For instance I set the thermostat at 68 and I get 75. I end up shutting the furnace off to avoid wasting oil and sweating to death. It does not run constantly but fires off and on.
Pilot light on Furnace continues to go out, blows cold air
[ 4 Answers ]
The pilot light on my Lennox Furnace continues to go out. The furnace is now blowing cold air. The pilot light has been relit 3 times in the last 24 hours. The thermocouple box has already been replaced. No, there is not a draft of air near the furnace. Why does the furnace continue to do...
After bleeding oil furnace pilot light continues to blows out
[ 1 Answers ]
I bleed the oil furnace, it runs normal for a minute and then the pilot light die out. So far I have bleed about a 1ltr of oil from furnace. What do I need to do to keep the pilot light lit ?
Furnace turns off heat and fan continues blowing cold air.
[ 14 Answers ]
Carrier split unit Model 58RAV055-GC Circuit Board at Furnace CES0110057-00 Natural Gas I am experiencing a problem with my heat. I have a programmable zones thermostat and noticed that the air was not coming out hot when it was suppouse to be. The temperature was set to 75 but the temperature... View more questions Search
|