Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Furnace continues to run (https://www.askmehelpdesk.com/showthread.php?t=296156)

  • Dec 27, 2008, 03:37 PM
    kfitz
    Furnace continues to run
    Hi! I have just purchased a slightly used home. The furnace I knew was going to be a problem but was hoping to get through the winter. It's very old and just two days after moving in the furnace has developed a problem that it doesn't turn off. I disconnected the thermostat and the furnace continues to run.

    If the relay on the Fan Control Centre is fused would that cause this problem or is likely something else?

    The furnace is a Clare-Hecla Model # EG125HB-6B.

    Thanks in advance to anyone who responds.
    :mad:
  • Dec 27, 2008, 04:50 PM
    21boat

    If it's a slightly used home why would the furnace be old and did someone steal the slightly new furnace?
  • Dec 27, 2008, 05:21 PM
    kfitz
    Quote:

    Originally Posted by 21boat View Post
    If its a slightly used home why would the furnace be old and did someone steal the slightly new furnace?


    Sorry, I should have put the slightly in quotations like this "slightly" so that you could get the sarcasm in it.
  • Dec 27, 2008, 06:02 PM
    hvac1000
    If the relay on the Fan Control Centre is fused would that cause this problem or is likely something else?

    Yes it could be the problem especially if the furnace blower continues to run. I tried to look up your brand and model number but no luck here. Is this in the Canada?

    Sorry about the other posters comments in regards to someone stealing the silghtly new furnace. I got your drift but there are a few posters here that when they do not have a good answer for a guestion will try and change the subject for whatever reason.

    Almost all parts on a furnace are replaceable but I cannot find a listing for yours as I mentioned before.

    I did find this about the parent company of Clare


    Clare (Clare Brothers)



    Clare (also known as Clare Brothers) is a product line of oil furnaces, and is owned by International Comfort Products(ICP) (which in turn is owned by Carrier, which is a wholly-owned subsidiary of United Technologies Corporation). ICP markets furnaces under the brand names of Arcoaire, Clare, Comfortmaker, Dettson, Heil, KeepRite, Lincoln, and Tempstar. Clare makes residential furnaces and is headquartered in Canada. Clare does not have a public website.


    Contacting Clare

    Phone:
    ICP Customer Support: (931) 359-3511
    ICP's Administrative Offices: (800) 458-6650

    You might give them a call since I can not find a posting for there parts.

    You might also try

    Convex Energy at 613-723-3141 almost any Keeprite supplier should have patrts for them.


    Last but not least it is possible that you can get the brand and part number off the part that is defective. Most manufactures buy there parts from a vendor and most vendors sell parts also.
  • Dec 27, 2008, 06:36 PM
    21boat

    Sorry poster(s) I wasn't necessarily trying to be sarcastic. The new and old for me was the furnace a used from somewhere else and was trying to make light of it and poster you made me laugh in a good way! And I don't think of you or Havoc 1000 less for spanking me And yes Hvac1000 I can completely understand where you are coming from. A lot of my "answers" are questions to help get an answer from me or someone else a it speeds along the process .
    Again If I have Offended please except my apologies !!Happy Holidays !
    Signed 21 boat
  • Dec 28, 2008, 07:32 AM
    kfitz

    HVAC Thanks a lot! Looks like you spent a lot of time doing research. Much appreciated!

    21Boat.. no offense taken. Happy Holiday as well!
  • Dec 28, 2008, 07:50 AM
    kfitz
    HVAC I forgot to mention that yes I am in Canada. I read some other strings on several other forums last night and am now thinking it might be a problem with the gas valve?

    The fan would not shut off if the heat exchange manifold was over temp. correct?

    I was thinking to shut off the gas but thought that may not be a good idea as it would make relighting the pilot a little dangerous.

    The fan control centre is a White-Rodgers. Type 8A05A-101 and I have no luck finding that online. It is SPDT Relay 24V Primary 120V Secondary 25V 38VA.

    If it turns out to be the valve I guess I might as well bite the bullet and get a new furnace? If the furnace is as old as I think it is I imagine a tech who comes to replace the valve would red tag the furnace.

    Thanks for you help again.
  • Dec 28, 2008, 08:03 AM
    hvac1000
    Bottom of page left side.


    AMRE Supply - Canada's Parts Pros [Electrical -> Distribution Devices -> Relays] - Browse
  • Dec 28, 2008, 09:21 AM
    kfitz
    THanks HVAC! This says single throw but on the part on the furnace it says SPDT. The part number is correct though.
  • Dec 28, 2008, 11:52 AM
    hvac1000
    I just went by the part number. I would make sure before you order.

  • All times are GMT -7. The time now is 05:30 AM.