Ask Experts Questions for FREE Help !
Ask
    salandbarbara's Avatar
    salandbarbara Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2008, 09:12 AM
    Rudd heater runs the flame will not stay on to heat
    I Have a Rudd Heater it has a electronic ignighter it comes on lights the flame, but the flame will not stay on, the heater runs but the flame comes and goes, it will not stay on and heat the house
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 26, 2008, 09:22 AM
    Quote Originally Posted by salandbarbara View Post
    I Have a Rudd Heater it has a electronic ignighter it comes on lights the flame, but the flame will not stay on, the heater runs but the flame comes and goes, it will not stay on and heat the house
    Just a guess since no model number try this.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fahrenheat wall heater, fan runs but no heat [ 6 Answers ]

I have a Fahrenheat wall heater. The fan runs but the air is cool. I'm unable to find the paperwork for this heater and I do not remember the model number, but it is a smaller unit. I'd appreciate any assistance with troubleshooting the problem. Can I repair or do I need to purchase another...

Blue Flame-Pilot will not stay lit-Hot Water Heater [ 7 Answers ]

My pilot light has a crisp blue flame when I light it and stays that color, but it will not stay lit. I have no problem lighting it, and then it takes off, but then it will go out after an hour or so. So, is this the thermocoupler?

Rudd Heat Pump needs Condenser Motor Wired [ 1 Answers ]

My unit is a Rudd model# UPGB-025JAZ, 208/230 volts year 1997 I believe I have a single pole contactor with a 24 volt coil.. PS thanks for hanging in their with me!

Heater flame does not stay on [ 1 Answers ]

My home ac\heater mounted on the roof Normally when activated I hear a low hum for a few seconds Then I can hear the flame go on A few seconds after this the fan goes on. Recently the flame goes on and off until eventually it stays on Then it works normal after that.

Flame can't stay on [ 2 Answers ]

I have a 1991 Comformaker furnace. Problem: it take much longer time (inducer) to turn pilot light "on". Then, flame come "on". But flame will not stay "on" when circulating fan is running. (The flame roll out in about I minute after the circulating fan is "on").

View more questions Search