Ask Experts Questions for FREE Help !
Ask
    ejhansen1982's Avatar
    ejhansen1982 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2008, 08:26 PM
    Evcon furnace troubble
    I have a evcon furnace for my mobile home and we have trouble keeping it running
    We have replaced the motor, ignitor and the limit switch It will blink 4 times which on the furnace means limit switch open. Please help
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 18, 2008, 08:36 PM

    Limit faults usually mean the unit is overheating. Replacing the limit switch won't correct this. If the air filter(s) aren't clogged, you may need a pro to find and correct the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 4 Answers ]

Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Coleman evcon oil furnace [ 8 Answers ]

I have an older coleman evcon oil furnace that ran fine until today.It still runs but the smoke exiting the chimney is pure black and sooty. Would this be an indication it's not getting enough air or maybe getting too much oil? Don't have any experience with oil furnaces. Thanks, Ken

Coleman evcon furnace [ 1 Answers ]

I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working

Evcon propane furnace [ 1 Answers ]

I have an Evcon mod. CGU09516 furnace. Upon starting it seems to work OK. But when blower motor cuts in the flame cuts out.After doing this 2 or 3 times it cuts out and will not cut in anymore. ...

View more questions Search