Ask Experts Questions for FREE Help !
Ask
    sdeng's Avatar
    sdeng Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 17, 2008, 09:34 AM
    NOMA 52-2570-6 thermostat
    I has just installed NOMA 52-2570-6 thermostat. I find the current humidity display is wrong. It always display 26-29%. I am sure that my house real humidity should be 45-55%. If anyone know how to fix it, please let me know.

    Thank you very much.

    sdeng
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 17, 2008, 11:14 AM
    If no way to adjust is shown in your owners manual then it cannot be adjusted and you will need to obtain a warranty thermostat. If adjustments are available the follow the directions.

    BTW make sure you check the humidity lever with a known reference since 29% is a possibility in the
    sdeng's Avatar
    sdeng Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 18, 2008, 08:49 AM

    Thank you for your reply. I can't find the way to adjust from the manual. I have a reference hydrometer showing current humidity was 45-55% in the same location, So I am sure the thermostat is wrong. I did reset (soft and hard reset) but it was sill same. Please help me to find out other solution. Thank you,

    Saul
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #4

    Dec 18, 2008, 10:55 AM
    This should be your stat but with a little different number.

    http://www.upm-marketing.com/images/..._Downloads.pdf

    Nothing in the directions say how to adjust the humidity reading just how to adjust the humidity setting for the humidfier to turn on and off.

    See actual page 11. It also states that it will only work if a humidifier is hooked up to the thermostat.

    That is all the info I have.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma programmable 52-2570-6 [ 5 Answers ]

Any ideas why this system (which is new to me) always goes a degree higher than what it is set for? Example: I have it set for 16.5 and it goes to 17.5 When I have it set for 17.5 it goes to 18.5 I have it on the +/- 0.3 setting Thanks for any input...

Noma Programmable Thermostat 52-2570-6; cycling in heating [ 3 Answers ]

I have installed one of the above unit for my ac and furnace. While the item works perfectly when only the AC related wires are connected, It just keeps coming on and off continuously, with the exhaust fan being the only thing that comes on and off. I got a technician to come in and look at the...

Installed new Noma thermostat 52-2570-6 heat stays on [ 2 Answers ]

I bought this Noma thermostat and the heat stays on, no matter what. Even if I detach the front plate the heat remains on. When I reinstall the old mercury swtiched thermostat it works fine. I have a 2 wire hydronic heat system. Can anyone tell me why the heat stays on? Any advise will help....

NOMA 52-2570-6 Programmable Thermostat. [ 1 Answers ]

Purchased NOMA 52-2570-6 Programmable Thermostat. Page 32 of Manual says:"Install 2 AA batteries, following polarity as marked; (in the right side on the rear of unit). "LCD screen will immediately show the room temperature." (I build my own computers, so I'm not inable) LCD screen did NOT light...


View more questions Search