Ask Experts Questions for FREE Help !
Ask
    dog812's Avatar
    dog812 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2008, 09:28 PM
    Need to remove brand/wiritng on plastic pipe.
    I am making a led hula hoop for a xmas present, I have it done.. but the labelling on the pipe is still there.. I have tried acetone and nail polish remover.. but nothing..
    Any suggestions?
    Here is a pic of what I need to remove..
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Dec 16, 2008, 10:06 PM

    Hi, dog812!

    Lacquer thinner applied with soft cloths and/or #0000 steel wool might also do the trick.

    Just a thought...

    Thanks!
    dog812's Avatar
    dog812 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 16, 2008, 10:16 PM
    Quote Originally Posted by Clough View Post
    Hi, dog812!

    Lacquer thinner applied with soft cloths and/or #0000 steel wool might also do the trick.

    Just a thought...

    Thanks!
    Ill give it a whirl
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #4

    Dec 16, 2008, 10:27 PM
    If those kinds of thinners don't seem to be effective, then you could also try some wet/dry sandpaper of say 320 grit or above with either water or paint thinner as a lubricant to see if that might work too.

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mixing abs plastic pipe with schedule 40 plastic pipe [ 1 Answers ]

I need to add a drain and there is existing schedule 40 plastic pipe, can I cement abs plastic pipe to the schedule 40 using multi purpose cement?

Plastic Pipe Weld [ 1 Answers ]

I have a 33mm push on 90 Deg joint from my hand basin under the floor boards, which recently came off and flooded the kitchen. Am I OK to replace the joint with a weld joint using the existing waste pipe or would I need to replace the pipes too? Thanks.

Plastic flange to lead pipe [ 7 Answers ]

How do you connect a plastic flange to lead pipe and keep it from moving

Plastic flange to lead pipe [ 1 Answers ]

How do you connect a plastic flange to lead pipe and keep it from moving

View more questions Search