I am making a led hula hoop for a xmas present, I have it done.. but the labelling on the pipe is still there.. I have tried acetone and nail polish remover.. but nothing..
Any suggestions?
Here is a pic of what I need to remove..
http://www.randydeanconstruction.com/images/pipe.jpg

Hi, dog812!

Lacquer thinner applied with soft cloths and/or #0000 steel wool might also do the trick.

Just a thought...

Thanks!

Quote:

---

Originally Posted by Clough

Hi, dog812!

Lacquer thinner applied with soft cloths and/or #0000 steel wool might also do the trick.

Just a thought...

Thanks!

---

Ill give it a whirl

If those kinds of thinners don't seem to be effective, then you could also try some wet/dry sandpaper of say 320 grit or above with either water or paint thinner as a lubricant to see if that might work too.

Thanks!