Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Blower motor runs very slow
[ 1 Answers ]
I have a Armstrong Air/Ultra V/Advantage 93 (built by Lennox?) and my blower motor doesn't get up to high speed. I ran only in "fan" mode and the motor gets too hot to touch. Is it a bad motor, bad capacitor, board... The failure code is saying OK (steady flash).
Blower motor only runs in low speed
[ 1 Answers ]
Im running my air conditioning and my blower motor is only running in low speed. I have a american standard furnace model no. ud080c936j I came home from work and the house was hot so I went to turn on the air but it was already on. So I went down to check the furnace and the blower wasn't...
Furnace not heating the house. Damper on the furnace not opening. Motor then shuts.
[ 4 Answers ]
My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:
The draft motor runs continiously
[ 3 Answers ]
Hi, I have a 80% efficient furnace and I am having the following trouble with the heat. The draft motor starts running the moment I power on the furnace. Its had been running during the summer time also when the I just was using AC. Being new to these things I did not realize that it was a... View more questions Search
|