Ask Experts Questions for FREE Help !
Ask
    aneux's Avatar
    aneux Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2006, 07:09 PM
    New dryer won't work
    I got TODAY a kenmore elite electric dryer. It's all hooked up, seems fine, push the start button, it runs for about three seconds and then goes off. Cannot start it again until a few minutes later, and then the same thing happens. Tried many different settings, etc. any ideas?? Thank you
    shunned's Avatar
    shunned Posts: 268, Reputation: 20
    Full Member
    		  
    #2

    Jul 5, 2006, 02:05 AM
    After thoroughly reading the owners manual for something and not finding anything, I would contact the service department where you bought it.
    timcha's Avatar
    timcha Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 15, 2006, 02:38 PM
    Good luck. I hate to tell you that you just bought the biggest lemmon in the appliance industry today!

    Check out this link:

    http://www.epinions.com/msg/show_~th..._~forums#posts


    It may shed some light on your problem... also, if sears will take this thing back, it would be a good time to get rid of it. Mine is now three years old, and is having the same problem. Ask sears lack of customer service department about "service flash" # SF26-751.

    I hope you have better luck than the hundreds of others with the same problems.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer Not Heating [ 31 Answers ]

I have a 14 year old Kenmore electric dryer that recently stopped heating. Everything else seems to be working fine. The drum works and there is plenty of air flow. I checking the different thermostats and heater element with a ohm meter and they all seemed to have activity except for the...

Dryer not drying [ 1 Answers ]

My frigidaire dryer is heating but not drying in the appropriate time. It takes forever for the clothes to dry. Could this be the heating element?

My dryer gew9868kq0 [ 1 Answers ]

Hey what up guy I need help my dryer doesn't dry anything. I checked if the element heated up but it didn't, so I did a continuity test and I get a reading of 010 :confused: , does that mean it's bad or something else is wrong. HELP!!

Dryer won't run [ 7 Answers ]

I have a 6 year old Maytag electric dryer. It stopped running in the middle of a load and will not start. The interior light is out (I tried a new one) and it worked before. The timer works - it will advance- but the dryer refuses to come on when it is pushed. I have checked the door switch as...

Dryer... Gas + venting... [ 5 Answers ]

Well, now that I’ve realized just how helpful this forum is, I’ll bother you folks with another question… I’m installing a gas dryer in my new house. This place, to my knowledge, has never had a dryer before. I’m not too concerned about running the gas lines (well, slightly concerned, but I...

View more questions Search