Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing electric Space Heater - do I need heat resist. Wire?
[ 2 Answers ]
I'm installing a 240v, 1500 W (6.25 A) electric space heater made by: Zonal Energy Efficient Heater - Electric Wall, Fan, and Baseboard Heaters I read their installation instructions - no requirements fro wire are spelled out. Can I run regular 12/2 romex to this or do I need some type of...
Electric Fan Heater
[ 3 Answers ]
I have a Modine 47 (115v) fan heater, a thermostat and a zone valve. Currently the thermostat controls the zone valve. How can I wire these together to get the thermostat to control the zone valve and the fan heater? Any help would be appreciated.
Installing a frigidaire electric dryer gallery series
[ 1 Answers ]
How do you hook up the wires in the back of the dryer, there are 4 wires and I need to know what color wire goes where.
Installing Electric Walloven
[ 1 Answers ]
I am remodeling my kitchen and have purchased a 27" electric wall oven. I have given manufacturer's spec ( cabinet cut out dimensions ) to my cabinet company but at the final phase of my remodeling found out they made the depth a little short. The full length of the oven is 24 1/2 " but need 23...
Installing a Electric Stove/Oven
[ 2 Answers ]
I'm installing an Electric Stove/Oven unit that is not up against a wall. There are cabinets on either side of the stove and a counter for eating behind the stove. I have my wire coming up through the floor behind the stove for the plug. The stove has a downdraft exhaust fan (exhaust fan is under... View more questions Search
|