Ask Experts Questions for FREE Help !
Ask
    psc88's Avatar
    psc88 Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 30, 2008, 11:02 PM
    State select 75 gal water heater pr675xrvit about 4 yrs old. Fail to ignite.
    Gas water heater. 75 gallons. State select model pr6 75 xrvit. Installed in 2005. Has been working well. Last few weeks, it stopped to come on. I was abled to cycle the ON-OFF toggle switch and restart. Usually take a few try.
    The LED status light shows 101001.
    According to the manual:
    Pressure switch remained opened longer than 5 seconds after the combustion blower was energized.
    1. Pressure switch wiring is incorrect.
    2. Pressure switch tubing not connected correctly.
    3. Air intake or exhaust obstructed.

    The blower tried to turn about 3/4 of a turn, every time the ON-OFF toggle switch is cycled.

    Questions
    1. How does on check if it is the blower?
    2. Would the bower need to be replaced?
    2. Where to buy parts for State select model?
    3. Manual does not show part number for blower. Or any parts

    Regards,

    psc88
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #2

    Dec 1, 2008, 12:36 AM

    Hello psc88,
    Attach is the link for your heater go to page 36/37 for trouble shooting and page 38/39 for parts. To order parts or need help with the repair contact the company or manufacturer that you purchased the heater from it is listed on the model rating plate on the water heater, good luck.

    John

    http://hotwaterexpress.com/PDF/184326-001.pdf
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Dec 1, 2008, 05:31 AM
    Hi Psc88:

    First thing to do is to shut the power off at the CIRCUIT BREAKER for 30 seconds.

    Then turn power back on and try to re-start the unit.

    If that doesn't work then look for a red reset button on the draft hood. If red button is popped, push it back in. Then shut power at the circuit breaker for 30 seconds and then return power and try to re-start again.

    If these things fail to work then contact state industries technical department at 1-800-365-8170 They will tell you exactly what the 101001 at the LED screen means. They will also be able to send you the correct repair parts.

    http://www.statewaterheaters.com/contact.html

    Be sure to have a model and serial number available!

    Good luck...

    MARK
    psc88's Avatar
    psc88 Posts: 2, Reputation: 1
    New Member
     
    #4

    Dec 1, 2008, 06:36 AM
    Thanks
    Turned out the water heater is still under warranty. Still waiting for States to answer my call.

    psc88

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Water Heater [ 24 Answers ]

Power direct vent water heater blower will not shut off. Plenty of hot water. Gas water heater. 75 gallons. State select model pr6 75n rvt. The blower is integral to the unit. I could not find the exact model number on the web site and did not find the problem under the troubbl shooting guide....

State Select Hot water heater [ 9 Answers ]

I have a state select hot water heater. I am all of a sudden continuously hitting the reset button (in the hot water heater), any idea what is making this happen and can I replace the braker in the hot water heater. I am assuming it isn't the element because the water does get hot, that is until...

State Select Water Heater [ 3 Answers ]

We have a state select power vent water heater. Last October it stopped working and the plumber replaced the ignitor as the wires had shorted out. Then it happened again in the beginning of January 2008 and he again replaced the ignitor. Well, our water heater stopped working again today and the...

State Select Hot Water Heater [ 4 Answers ]

How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool. Thank you.:)

State select water heater [ 2 Answers ]

How do I adjust the water temp?


View more questions Search