Ask Experts Questions for FREE Help !
Ask
    dozzy1951's Avatar
    dozzy1951 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2008, 05:56 PM
    Pull switch trouble
    I have a hamilton bay fan/light the pull switch fell apart so I bought another one but don't know where the wires go I have a black, purple, orange and yellow wire and have l 1 2 3 on the back of the switch
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 4, 2008, 11:30 PM

    You can try

    L - Orange, 1 - Black, 2 - Yellow, 3 - Purple

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Celing fan pull switch [ 8 Answers ]

I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...

New 4 wire pull switch [ 1 Answers ]

My harbor breez ceiling fan pull chain broke inside the switch I bought another 4 wire switch I wired it up but it doesn't work I assume because of the wires. The switch is a harbor breeze switch 33905 the back has openings for 1,2,3 and L . My wires are orange yellow, purple, and black ...

Pull chain switch [ 3 Answers ]

:confused: I was told that I could convert any light fixture to a pull chain light by drilling a hole in the light canopy and connecting a pull chain switch. I did that and got the light to work but it will not turn off with the chain, I have no wall switch. Is this all wrong or have I connected...

Converting pull switch lights to wall switch [ 3 Answers ]

I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...

Pull switch [ 2 Answers ]

Anyone know how to replace the cord in a pull switch? Thanks

View more questions Search