 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
new 4 wire pull switch
My harbor breez ceiling fan pull chain broke inside the switch I bought another 4 wire switch I wired it up but it doesn't work I assume because of the wires. The switch is a harbor breeze switch 33905 the back has openings for 1,2,3 and L . My wires are orange yellow, purple, and black question=which goes where?
|
||||
|
||||
|
They go in the same places as they did on the original switch.
Ceiling fan pull chain replacement and repair - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
:confused: I was told that I could convert any light fixture to a pull chain light by drilling a hole in the light canopy and connecting a pull chain switch. I did that and got the light to work but it will not turn off with the chain, I have no wall switch. Is this all wrong or have I connected...
I am wanting to add a pull chain mechanism to a new, hard wired type light fixture. I have purchased a ceiling fan light kit pull chain mechanism. The pull chain mech has red, blue and black wires:eek:. . The fixture has white, black and ground. . How do I wire this up?
I've been struggling finding the answer to this in books and online, it seems as if it should be an easy question and something that gets done all the time. Looking for some help. My basement has several rooms and all lights are wired "hot" with pull switches from each light receptacle. When the...
Anyone know how to replace the cord in a pull switch? Thanks
Help! My new pull chain switch has (only) two black wires; how do I connect it to the ceiling wires (one black, one white, plus the ground wire)? Thank you! Willow
View more questions Search
|
