Ask Experts Questions for FREE Help !
Ask
    johnnypearson's Avatar
    johnnypearson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2008, 04:48 PM
    Connect my 6-3 wire to a range box

    I want to connect my 6-3 wire to a range box
    Does the wire go in the lug only or in the lug and the copper slot also
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 30, 2008, 08:47 AM

    Hi,
    Generally your switch should have a twelve volt source. Often there will be a smaller wire connected to the same side of the solenoid as the battery. This serves to "energize" the wiring harness. A wire will connect to a smaller post of the solenoid that is the trigger. Without any numbers it is hard to say what and how many safety switches may be in the circuit and which pint they are used in the circuit.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What's size wire for my range? [ 4 Answers ]

I'm wiring a 4 prong plug for my new range. The plug provided says it's a 50 amp size 6/2 & 8/2 SRDT?? What do I get for wire and do I need to pick up a 50 amp breaker?

New 4 wire Dryer/Range Outlet [ 8 Answers ]

I have an older style breaker panel where the neutral & ground wires are connected at the same strip! I plan to upgrade the panel to a 4 wire system with a separate neutral & ground, However since I also need to have the service entrance line upgraded also it won’t be until later this year before I...

Changing the actual range from 3 to 4 wire [ 1 Answers ]

How do I make changes to the actual range to convert it from 3 wire to 4 wire? Everyone talks about replacing the wiring cord with a 4 wire cord, but I have an old range that grounds the common to the frame. It seems to me that I have to disconnect the ground to frame connection and install a...

Can I connect a 240 volt electric range to a 30 amp breaker [ 1 Answers ]

I'm renovating a rental unit and removed a 3 in one appliance (bar fridge/2 stove elements/sink). It was hooked up to 10/3 copper wire on a 30 amp breaker. I want to install a 24 inch electric stove/oven in it's place. I want to hook up a 24 inch electric stove/range to 10 gauge 3 copper wire...

View more questions Search