Ask Experts Questions for FREE Help !
Ask
    Westwind521's Avatar
    Westwind521 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2008, 11:00 AM
    Kenmore 600 Washer 29622, Hot wash temperature
    I just purchased a new Kenmore 600 washer, model #29622. I noticed that on the HOT wash temperature the washer fills alternately with hot water and cool water, which results in a tub full of very warm water. My previous two washing machines filled ONLY with hot water when the selector was on HOT temp.

    Is this normal for this machine or is this a malfunction? :confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2008, 01:52 AM
    Some of the new style washers have a temperature graduating sensor. The sensor if so equipped could be defective. If it is new call Sears it has a warenty.
    randysheehan's Avatar
    randysheehan Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jul 12, 2012, 05:43 PM
    I have replaced my temperature control twice, it is a bad design. If I have the temp knob on Cold, Cool or Warm it washes on Hot, If I have it on Hot it washes on Cold. And, it rinses everything on Hot regardless.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Automatic Washer with CALYPSO Wash Motion [ 5 Answers ]

I purchased my washer in March 2002. It is displaying an error message "FL" and occasionally a "Ld" message. It is filling with water but will not go through the wash cycle and empty the water. I have been told that there may be a recall on this machine. Does anyone know how I can find out or fix...

Kenmore stack washer/dryer - washer makes noise during wash [ 2 Answers ]

My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and [ 1 Answers ]

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and the door locks and won't open

Kenmore Elite HE3 washer stops during wash cycle with "HF" error [ 0 Answers ]

I have a Kenmore Elite HE3 washer that stops during wash cycle with an "HF" error and the door locks and won't open

Kenmore washer over flowing after wash cycle [ 1 Answers ]

Model # 20872990 After wash cycle water overflowed. Damage to house w/service master 8 fans and 2 dehumidifiers to dry out for $1000 deductible. Appliance repair man not able to find ANY problem! Machine works perfect. His only guess is very infrequent problem of the water level switch not...

View more questions Search