Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Changing furnace fan speed to change delta
[ 7 Answers ]
I have a 12 year old Goodman furnace. About 3 years ago, I asked a service tech if there was anything that can be done to get warmer air out of the registers. He said he slowed the blower speed to get a higher temperature rise. I had the ductwork replaced and it is smaller than the original...
Ceiling Fan - Motor Start Capacitor
[ 2 Answers ]
I have a Hampton Bay ceiling fan whose motor fails to self-start. The fan has three speeds. All three speeds work fine if I hand spin the blades, starting at low speed of course. The fan has a remote unit. Once I hand start the fan the remote allows me to change speeds up and down and turn off the...
I need more speed on ceiling fan
[ 1 Answers ]
I have a hunter ceiling fan. It usually is on about 8hr during the night since I live in the tropics. I don't use the reverse and I have separate switches for the fan and light. The fan is set on max speed always. I need more breeze from the fan so I slightly bent each blade by about 2 degrees and...
Ceiling Fan single switch/Light two 3-way switches
[ 1 Answers ]
How do I wire... Ceiling Fan with Light switched separately. Light to be controlled by two 3-way switches and fan controlled by a separate single switch. :confused:
Ceiling fan high speed
[ 1 Answers ]
I reinstalled a ceiling fan from the basement. When it was down there all 3 speeds worked fine. Now that I've reinstalled it upstairs, it only runs on high speed. The are 4 wires from the fan, white black blue and green. Green is ground, blue is for the light, white neutral and black hot. 3... View more questions Search
|