Ask Experts Questions for FREE Help !
Ask
    aeb123's Avatar
    aeb123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2008, 08:29 AM
    Bryant Plus 90 furnace maintenance
    Furnace installed in 1996.. recently purchased home... what type of maintenance is required for this furnace? What components need oiled/greased? Humidity control seems not to be working.. corroded parts on outside of furnace control.
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #2

    Nov 17, 2008, 10:28 AM

    I would try contacting Bryant/Carrier and see if they can get you an installation guide that may include all the things that need annual maintenance such as: fan lubrication, temp sensor cleaning, coil cleaning if you have one, routine HSI replacement depending on type. Longer term you may need heat exchanger cleaning, burner cleaning and adjustment, gas valve adjustment, etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Furnace Plus 80 [ 2 Answers ]

Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...

Oil furnace maintenance [ 1 Answers ]

Trying to locate the spray nozzle on my oil furnace

Bryant gas hot air furnace [ 1 Answers ]

I have a bryant gas hot air furnace model #397HAW036100. It has been nothing but trouble since day 1. here's my problem this year again. Purge fan kicks on gas valve goes on to pilot lights. Clicks on gas valve and pilot goes out. Does this about 6 times before it locks out. Last couple years...

Bryant Furnace Burner Going On and Off [ 1 Answers ]

Bryant Gas Furnace P/N 394DAC03100 about 30 yrs old. Pilot light stays light and burner going on and off after checking valve problem seems to be some type limit switch when I move the wiring by shaking a little it ignites. Having a problem finding which wires are loosely connected..? If anyone...

View more questions Search