Ask Experts Questions for FREE Help !
Ask
    cwarborg's Avatar
    cwarborg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2008, 09:34 AM
    How to change belt on a maytag dryermodel hyeg2460
    I need to change the belt on a maytag dryer and don't know how to do it It is model hyeg2460. It does not have a front panel.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2008, 02:46 AM
    Pry up top by releasing clips. Remove two screws on one on each side nearb top. Lift ot and up to remove from botton anchors.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing belt on maytag dryer [ 3 Answers ]

The drive belt for the drum broke. We have the front off and pulled out the old belt. We looked to see where it rides on the drum before we removed it. Now what do we do? My husband thinks we have to loose the screws that hold the drum in place and put the belt over the drum that way. The...

Maytag Performa Dryer belt change? [ 2 Answers ]

This dryer is a little different from others. The motor is in the rear, and the front is very hard to remove. I have the top off, no problem, but can't reach the screws holding the front on. They are way down the side, and access is very limited. To remove the hinged front cover, the top screws I...

How do I route my maytag performa dryer belt? [ 1 Answers ]

I have everything apart. I replaced the motor. Now I am trying to route the belt around the drum but for some reason it has no tension. I'm assuming I'm not routing the belt correctly...

Maytag belt failure [ 2 Answers ]

Dryer belt has been replaced 2 times. What could cause repeated breaks? It appears the drive wheel off the motor (which runs fine) wears away the belt in one spot. Could this be tension problem? Drum turns easily by hand.

View more questions Search