Ask Experts Questions for FREE Help !
Ask
    jnrice305's Avatar
    jnrice305 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 12, 2008, 09:07 PM
    Combustion motor runs all the time on coleman furnise
    I have a coleman furnise in a 2002 mobile home. Model DGAA056BDTA. Heating and air conditioning works good. The only way the combustion motor will shut off is with the breaker. I had to replace the motor because a bearing went out, and in the process I found a circuit board on the roof with the motor. I don't know where else to go with this. Please help. Thanks.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 12, 2008, 09:25 PM

    I'd have to find a manual. Causes of this kind are usually traced to relays that the contacts have fused. They may be on the control board or external. You may need to replace the control board.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #3

    Nov 13, 2008, 01:20 AM
    Go to this site and post your problem under coleman. This is a great mobile home site and they have parts also if needed.

    mobilehomerepair.com :: Index

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman electric furnace fan runs only in manual [ 2 Answers ]

I have a mobile with a forced air Coleman electric heat. The fan will not run in the auto setting (switch by motor in cabinet) but the element will heat up. In manual the fan runs constantly and heat comes on with the thermostat. The heating company recently replaced the sequencers and said we...

Coleman hvac blower runs continuously. [ 3 Answers ]

We have a 1998 mobile home with a coleman hvac. For the past 6 months the blower has not turned off even though the air itself has? Does anyone have any suggestions to what might be causing this?

Blower motor runs very slow [ 1 Answers ]

I have a Armstrong Air/Ultra V/Advantage 93 (built by Lennox?) and my blower motor doesn't get up to high speed. I ran only in "fan" mode and the motor gets too hot to touch. Is it a bad motor, bad capacitor, board... The failure code is saying OK (steady flash).

Blower motor only runs in low speed [ 1 Answers ]

Im running my air conditioning and my blower motor is only running in low speed. I have a american standard furnace model no. ud080c936j I came home from work and the house was hot so I went to turn on the air but it was already on. So I went down to check the furnace and the blower wasn't...

The draft motor runs continiously [ 3 Answers ]

Hi, I have a 80% efficient furnace and I am having the following trouble with the heat. The draft motor starts running the moment I power on the furnace. Its had been running during the summer time also when the I just was using AC. Being new to these things I did not realize that it was a...


View more questions Search