 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Good evening. Our old thermostat was model T8195B which came with wires C,Y,W,R & G. has no rererence as to where they hook up. The new one RTH230B doesn't say where these wires go. I've removed the Rc/Rh jumper according the instruction manual. Nothing went on at all. What can I go Thank...
I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...
Is there a way that I can use my thermostat without it being programmed to come on at a specific time. Someone has reset it somehow and now the A/C isn't coming on during the night which in the summer time is unbearable. I just want to be able to set it so that it comes on when I hit the button. ...
I installed the honeywell rth230b thermostat in the house for a furnace. I hooked all the yellow wire green wire and white wire up to each of the corresponding holes for each color I have a red wire and two holes for rc and rh not sure which hole to put the wire and is it supposed to be jumpered...
This winter I installed honeywell rth230b. Heater works great, but I have no a/c. I have 6 wires from wall. Rh--red Rc--blue W--white Y--yellow G--green Brown not being used Help it is 90 deg. I need my a/c Thank you all
View more questions Search
|
