Ask Experts Questions for FREE Help !
Ask
    housepainter123's Avatar
    housepainter123 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2008, 07:24 PM
    Price per sq. foot comm painting
    In up state New York. What is the going prise to paint new sheetrock, one coat.per sq foot
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
     
    #2

    Nov 1, 2008, 04:21 AM

    Hi, housepainter123!

    How much painting experience have you had, please?

    In in the northern part of New York State, I would expect that the prices would be about twice what they are around where I am. So, I think that $1.80 to $2.00 per square foot including the cost of the paint might be fair figures to use. That would be for two coats of paint applied with a roller. If your painting on bare Sheetrock, then you'll need to apply a primer. I would add another $1.50 per square foot for that for one coat of primer applied with a roller.

    You'll need at least two coats of paint for a top coat for the job to look decent. When cutting in the edges with a brush or appropriate applicator, then ideally, two people should be doing the job so that lines aren't visible. One person does the cutting in while the other one does the rolling immediately after the cutting in is done.

    Thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price for painting interior square foot [ 8 Answers ]

What is the going price for painting 1100 square feet of walls height 12ft 800 square feet of ceilings lowest height 9 feet highest 15 feet sloped

Price per square foot [ 1 Answers ]

What do you charge per square foot on painting the inside walls of a house labor only living room, kitchen ,bathroom and bedrooms

Per sqare foot price [ 2 Answers ]

I am a painter in New York and am currently doing a small paint job in a school auditurium. I am painting a floor. I am applying two coats of a 1 part epoxy and would like to know what to charge per sqare foot. The job is in suffolk county on long island.


View more questions Search