converting from RUUD to Hunter 44155c thermostat
Hi there,
I'm sure this has come up before, but I can't seem to find a specific answer that I can use. I am trying to change tstats form a RUUD with 6 wires (one jumpered) to a Hunter 44155c that has different markers for the connections. RUUD tstat was wired Red-R, Blue-B, Green to G, Yellow-Y, White-W2 jumpered also to E, Brown-X, and no wires to O or L. I have a heat pump outside unit. The Hunter 44155c has the G, Rc, Rh, Y/O, W/B, Y1 and came supplied with a red juper on RC and RH. The supplid diagram and instruction manual are a bit confusing.
Now I'd like to know which wire does what and goes where.:confused:
|