Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Trane xe80 code 4, no heat
[ 5 Answers ]
All summer the cooling worked fine, when I switch over to heat this week, it didn't come on. The control box shows a code 4, which says "THERMAL PROTECTION DEVICE OPEN" Any help?
Trane XL80 Furnace Blows Only Cold Air
[ 1 Answers ]
This morning I woke up to a cold house, the furnace was blowing away and only blowing cold air. I checked the thermostat and the heat was set at 72 but the house was still at 66 degrees. I cycled the furnace on and off but still there was only cold air blowing from it. When I last checked before...
Trane XE80
[ 1 Answers ]
My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to...
Trane XE80 Won't Start
[ 1 Answers ]
My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
TRANE XV90 error code?
[ 4 Answers ]
The owners manual does not have a list of error codes for reference. The unit does not actually display a code (no pause), the light consistently blinks. I have never noticed this before, is this normal or something that should be looked into. Thanks! View more questions Search
|