Ask Experts Questions for FREE Help !
Ask
    ShirleyGriffith's Avatar
    ShirleyGriffith Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 23, 2008, 03:50 PM
    HEIL Fuel Oil/Forced Air Furnace
    The furnace was installed in 1979...

    The Furnace ignites and heats but the blower won't come on... I've called some furnace repair places and they are telling me they don't work on Fuel Oil Furnaces anymore. If someone can give me an idea as to what the problem could be, and or what kind of part I need, then I'm hopeing I can get one of my boys to fix it?? I Hope.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Oct 23, 2008, 04:36 PM
    Defective fan and limit control.
    Bad capacitor on blower motor or
    Bad blower motor.

    These are starters.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil Furnace [ 10 Answers ]

I have A Heil Furnace that starts up just fine Model #NDG1075DFo1, but after its running for 5 minutes or so it gets another call for heat, fills the gas box with naatural gas and re-lights this mix pretty violently. This may happen a few times during the heating cycle until the thermostat is...

HEIL furnace [ 1 Answers ]

Our heil furnace won't stay lit. It goes out after we release the pilot button. Any suggestion?

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

Having troubles with heil gas furnace [ 2 Answers ]

I have a heil forced air heating furnace that is going on and off and will not stay on to come up to temperature. It will not burn for more that a minute before it cuts off again. It was working fine just a week ago and now it is doing this. Would you have any idea of what may be wrong and what...

Heil furnace [ 2 Answers ]

I have bought a house with a furnace and I cannot get the pilot to light. I am asking for some type of manual so I can figure this out. The model is VG-80MD-1 and the serial is H73838067. The house was built in 1977 and I am sure this is the original Thanks for any info


View more questions Search