Ask Experts Questions for FREE Help !
Ask
    peachatlga's Avatar
    peachatlga Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2008, 02:24 PM
    Timer stopped working- Intermatic T104P3
    I am not sure how or why my pool timer stopped working, but I would like to know how to troubleshoot this issue. I have a multimeter and tested the wires with the breaker off and wires 1&3 have a reading(coming from the breaker box) but the other wires do not change when testing. I have tried fliping on/off the breaker, fliping on/off the manual lever on the timer, still nothing. I believe the breaker is OK.

    Can someone give me some troubleshooting tips?
    pablog57's Avatar
    pablog57 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    May 7, 2010, 03:53 PM
    I'm having exactly the same problem now with the timer. Did you ever solved your problem? Tks a lot,
    Pablo
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 8, 2010, 07:33 AM

    Test for power right at the outlet or connection to your electrical system. It could be the timer but could also be the power supply to the time.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    May 16, 2010, 02:12 PM

    If you have power to the timer and it doesn't rotate, its likely bad. Intermatic uses a New Style and an Old Style Timer Motors. 2 screws hold it in place and wires are on 2 terminals.
    Bring with you or get numbers on the back.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working [ 2 Answers ]

I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?

Intermatic T101 timer will not turn on [ 3 Answers ]

I have a Intermatic T101 timer which is only used once a day (evening). It is turned on at 7:00PM and turned off at 10:30PM automatically. The problem is it has stopped turning on by the tripper. I replaced the on tripper but it still does not work. I can turn it on manually. It does turn off...

Intermatic P1353 3-Circuit Timer [ 7 Answers ]

I am replacing my old Intermatic mechanical time clocks with the digital P1352 Timer. It has three separate circuits. It is a 120/240volt unit. The old timers had Line 1, Line 2 and load 1 and Load 2 blocks. The new timer has three separate Line 1 and Load 1 bolcks - NO Line 2 or Load 2 blocks....

Intermatic wall timer/switch [ 4 Answers ]

I would like to install one of those cool in wall programmable timer/switch but have a question. The switch I would like to replace controls 2-500watt halogen lights, 2-150watt incandescent flood bulbs, 60watt outside door light, and finally 2-150watt halogen lights which totals up to 1660watts. ...

Proper Wiring for Intermatic Timer [ 1 Answers ]

I just replaced simple switch that consisted of a hot in and load out to the filter plug (while the remainder of the wires including ground go directly to the plug) with a double pole/single throw timer. The manual switch works, but the actual timer has no power. I simply took the live wire and...

View more questions Search