Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wash cycles timer operation!
[ 1 Answers ]
:confused: Hi! My washer/dryer combo( Kenmore, mod.#417.99802990 won't wash in the regular nor permanent/press cycles, but washes fine in the delicate cycle! According to the parts list/illustration, the timer is the only component that seems to control this... So I'm thinking the contacts in...
York Stellar Gas Furnace cycles quickly
[ 4 Answers ]
Our LP gas furnace seems to be cycling rather quickly. The exhaust blower will come on for a few seconds, then the burner ignites properly. When the main blower fan kicks in the burner shuts off immediately. The blower continues to run for 30 sec. then stops. The exhaust blower continues for 45...
LER5636JQ0 Whirlpool Dryer takes multiple cycles to dry clothes
[ 2 Answers ]
Our LER5636JQ0 Whirlpool Dryer takes many 4-5 cycles to dry clothes, I cleaned the lint trap from the rear of the dryer and purchased a new vent system so all that is clear. There is heat and the dryer is tumbling. This seemed to have happen overnight. The dryer is electric and has had not a ton...
Kenmore 29" gas dryer Model #110.72602101 takes several cycles to dry.
[ 6 Answers ]
My 5 year old Kenmore Super Capacity gas dryer (model #110.72602101) suddenly started taking several cycles to dry a load of clothes. I checked the vent and it is not clogged. There is a plug on the front of the dryer I pulled off and watched the flame ignite and it stayed burning until the timer...
Whirlpool dryer takes several cycles to dry
[ 1 Answers ]
Here are the specs on my dryer, which is about 6 months past warranty: Type: DWSR-ELE-2406028-CV54 Serial: MR3413983 Model: LEQ9508PWO I verified that its exhaust duct and lint filter are clear of debris. Cleaning out the exhaust duct, I did notice that the lint in there was damp, but... View more questions Search
|