Ask Experts Questions for FREE Help !
Ask
    mugswoodhams's Avatar
    mugswoodhams Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 22, 2008, 07:15 PM
    Abs parking break dash lite on sometimes
    I have a 2001 chevy blazer 4wd 4 door v-6 the dash lites come on some of the time I was told to replace the electronic brake control module is this correct any other info appreciated
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Sep 23, 2008, 08:16 AM
    Quote Originally Posted by mugswoodhams View Post
    i have a 2001 chevy blazer 4wd 4 door v-6 the dash lites come on some of the time i was told to replace the electronic brake control module is this correct any other info appreciated
    There is likely a diagnostic code stored that would indicate a probable course to correct the problem.
    In some cases, the module may need replace. But, not all.
    Find someone to retrieve the code or codes and let us know.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Furnace will not lite [ 6 Answers ]

I have a 20 year old Rheem Gas Furnace with a standing pilot light. When I lite the pilot this season, everything worked fine. Furnace Fired up and all was good. Replace the panel, and by the time I took A few steps from the furnace it shut down. Now it will not relite. I have Jumped the...

Oil Lite won't go off [ 1 Answers ]

OIl Light Won't go Off ON 04 chevy 6500 How To Reset light

Why it won't lite [ 1 Answers ]

Why my beckett furance oil won't lite

Faulty lite [ 3 Answers ]

:confused: I recently installed a flouresent lite fixture and after being on for ten or fifteen minutes, it shuts off. Is the ballast bad or something else going on? Thank-jb.

Gas Furnace Doesn't Lite [ 3 Answers ]

My Carrier Furnace Igniter glows but the valve won't turn the gas on. I have discovered that the relay switch on the top of the valve has a bad connection to the pins (2 each) on the two solenoids. I can loosen this and slide up and down several times and it will work for awhile. My problem is that...


View more questions Search