Ask Experts Questions for FREE Help !
Ask
    scooze's Avatar
    scooze Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 20, 2008, 06:59 PM
    Furnace motor turns on and off
    I have a 4 year old Carrier furnace the motor turns on and off within minutes or even seconds From time to time with no air blowing, this also happens even if I have the thermostat in the off position.
    Thanks.
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #2

    Sep 20, 2008, 07:37 PM

    Is this a heat pump? I am assuming you mean the fan motor is what is running.

    Is there a high temp switch on the supply plenum that is calling the fan as if it is sensing an overheating condition? This could be faulty. Many furnaces have one of them for safety. That's my first guess. Or a bad control board. The duct purge control could be doing that, but that would be odd.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #3

    Sep 20, 2008, 08:26 PM

    At 4 years old it should be under warranty, call the installer

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor turns on and off [ 1 Answers ]

I have a combo roof unit. I have replaced both the capacitors for the compressor and conderser fan, and for the blower motor. The compressor and condenser fan work fine and stay on like they should. However the blower motor turns on and off repeatedly. Sometimes it will stay on for 5-10 min, some...

Starter turns but will not turn motor [ 1 Answers ]

I have a mtd 12.5 hp riding mower... I have done all tests on switch solenoid and by passed these and the starter mower will take off but when it engages to flywheel it seems to stop turning... the flywheel is not hard to turn therefore I'm thinking it still might be starter... the starter turns...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

Pre Flame motor turns on No Spin [ 3 Answers ]

My pre-ignition motor clicks on but will not spin. The motor spins freely by hand. Not hanging up on anything. Is the motor bad? Can I fix it myself by taking the motor apart? Could it be brushes in the motor? Please help. Thank you!


View more questions Search