Ask Experts Questions for FREE Help !
Ask
    bhweij's Avatar
    bhweij Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2008, 11:49 AM
    Override Main Circuit Breaker
    I am planning of installing two instant water heaters each rated at 240V/60A
    My electricity company will not provide MCB higher than 50A

    Does anyone know of any solution to override the MCB? Use of AC capacitors (e.g. charging at 20A to 720V and discharging at 60A at 240V)
    If such solution is feasible and safe, do you know of any capable capacitor?

    Any other tested solutions/devices are highly appreciated.

    Thanks
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Sep 19, 2008, 11:55 AM
    Quote Originally Posted by bhweij

    My electricity company will not provide MCB higher than 50A
    Where are you located?
    Is this a residence?
    bhweij's Avatar
    bhweij Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 19, 2008, 11:57 AM
    I'm in jordan and it is to be installed in an apartment.. thanks
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Sep 19, 2008, 12:07 PM
    Jordan as in the Middle East??

    Good luck!!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Sep 19, 2008, 12:46 PM
    Is this for Hot showers? With available capacity, you may have to use a Tank water heater.
    Tanks works well, Use with a time clock and a blanket for the heater to help with efficiency/ cost.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Main circuit breaker missing a handle tie. [ 1 Answers ]

I have a Culter Hammer circuit breaker panel with (2) 100 amp main breakers that are not tied together. A home inspector said they should be tied. Is he correct? If so can I add a tie or do I have to replace the breakers?

Main circuit breaker [ 12 Answers ]

The main circuit breaker keeps triping when it gets hot could it be old and need changing

Can I convert a main breaker Cutler Hammer loadcenter to main lug? [ 1 Answers ]

I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks

Blowing Main Circuit Breaker [ 1 Answers ]

I have a electric dryer that is 220 volt. When I turn it on, after about 15 minutes it doesn't blow it's own 30 amp breaker, but blows the 100 amp main breaker. I can shut off the 30 amp breaker specifically for the dryer and it shuts it off. Any ideas??

View more questions Search