Ask Experts Questions for FREE Help !
Ask
    ms2254's Avatar
    ms2254 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 16, 2008, 04:30 PM
    Pool pump timer
    I installed a T104R Intermatic timer to my pool pump... the pump will work with the manual off/on switch.. but the timer will not work... Instructions are vague on the wirig portion of the directions...
    albinfla's Avatar
    albinfla Posts: 310, Reputation: 35
    Full Member
     
    #2

    Sep 16, 2008, 08:29 PM
    2 wires coming in from your breaker go to lug 1 and 3. Two wires going out to your pump go to 2 and 4. Tie grounds together with a wire nut, and put a short jumper wire up to the ground screw. Make sure the 2 white wires coming from the timer motor go to lugs 1 and 3 also.

    The link to intermatic's web-site is http://intermatic.com/images/instruc...heets/T104.pdf

    Al
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Sep 17, 2008, 08:01 AM
    We need to start with the basics so please don't take this as an insult to your intelliegnce. When you plug your pump motor into the timer, set the running time, do you remember turning the motor switch back to ON? The timer send juice to the pump but the pump must be in the run mode.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pool pump timer [ 1 Answers ]

I had to replace my intermatic timer and had a freeze protector a polaris pump and a pool pump attached to it. My handy man (not an Electrician) hooked up these things to to my intermatic timer and the only thing that works now is the polaris pump (my hayward superpump pool pump is two weeks...

Pool pump and booster pump timer diagrams [ 2 Answers ]

I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts

Pool Timer & pump electrical connection [ 5 Answers ]

If one hooks up a pool pump to an intermatic timer incorrectly, can it blow the pump? I didn't hear anything. Is there a way to tell if the pump is bl;wn or just hooked up wrong? Thanks.

How to select an Intermatic Pool Pump Timer? [ 1 Answers ]

I haven't been able to source a distributor or retailer of Intermatic Pool Timer products in Ontario, Canada. I am looking to purchase one over the internet and have it shipped to me and installed by a local qualified electrician, but I don't know which model to purchase. Intermatic has 4...

Timer For Aboveground Pool Pump [ 5 Answers ]

Hi! I am a pool novice. I have a frameset aboveground pool with a cheesy pump - 1/16 HP, 120V. It's plugged into a heavy duty garage outlet, but it's not clear if it's a GFCI. What kind of pump timer can I use that is safe and inexpensive, possibly GFCI? Thanks!


View more questions Search