Ask Experts Questions for FREE Help !
Ask
    airjet59's Avatar
    airjet59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2008, 03:58 PM
    Visionpro TH 8000 Totally "Locked up"
    I have a Honeywell Vision Pro TH 8000. The batteries were changed, now the screen is LOCKED. NO buttons work. The display shows Tues at the top. At the bottom, 6 "buttons" the one on the far left marked, "done". The middle shows the year 2003 with up/down buttons next to it. At the top right, "SCREEN LOCKED", and the number 11 with up/down, and the bottom right shows number 2 with up/down. The backlight will come on, but I cannot access anything, or make anything change. I have changed the batteries, removed them for over an hour, even tried putting the wire between the opposite battery terminals to try and erase the lock. Any Ideas?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Sep 16, 2008, 04:10 PM
    See install manual. Either set parameter 0670 to 0, or do a factory reset and do the necessary programming.
    wheatnbarley24's Avatar
    wheatnbarley24 Posts: 63, Reputation: 3
    Junior Member
    		  
    #3

    Sep 16, 2008, 07:58 PM
    A manual reset button should be somewhere on the back of the stat face
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Music from the documentary "napoli corner" or "maradona in naples" [ 4 Answers ]

Oscar De La Hoya "Golden Boy" vs Floyd "Money" Mayweather Part 2 [ 1 Answers ]

Who would win between these 2. Oscar De La Hoya "Golden Boy" vs Floyd "Money" Mayweather Part 2 My vote is for Oscar to win this time by unanamous decision.

Honeywell VisionPRO 8000 Installation [ 5 Answers ]

Hi Everyone! We just finished building our new home and didn't think about thermostats along the way. There is a simple digital thermostat installed at this time but we wanted a programmable one. I attempted to install it today but the compressor wouldn't cut on. I've installed thermostats before...

View more questions Search