Ask Experts Questions for FREE Help !
Ask
    buddinb's Avatar
    buddinb Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 13, 2008, 10:05 AM
    Honda 3011 Riding Mower belt
    I have an older Honda 3011 Riding Mower that keeps slinging the blade belt off. I replaced the belt but the new one also comes off. There appears to be no slop.
    Thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 13, 2008, 10:24 AM
    Belt pulleys usually have some sort of keeper pin that redirects the belt back on if they try to slip off. Theses look like a 1/8" steeel shaft sticking up around the pulley but about a 1/4" out from the pulleys edge. Do you see them or a place where one broke off. Also check your spring loaded tensioner pulley, the one that moves when you engage the blades, to see if it has excessive wobble with the belt off.
    buddinb's Avatar
    buddinb Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 25, 2008, 08:22 PM

    Thanks ballengerb1, you were right. The keeper had come out. Also replaced the tensioner pully. Working well now.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda 3011 Riding Mower [ 4 Answers ]

We have been given this mower. It runs good, but we would like to know how to raise the blade so that it does not mow so close.

Honda 3011 Riding mower [ 9 Answers ]

Hi, just purchased a used Honda 3011 Riding Mower, I was looking to drop the oil in it and for the life of me I can't find the Drain Plug... Sorry for a lousy question, but your answer will really help... Please try to be specific... Steve

Honda riding mower 3011 [ 1 Answers ]

Charging system will not charge battery. Is there a part to replace like ac dc switch.

Honda 3011 riding mower transmission. [ 2 Answers ]

I have a Honda 3011 riding mower that starts but won't go into gear or turn the blade. All belts appear OK and oil is fine. Is the transmission likely ruined?

View more questions Search