Ask Experts Questions for FREE Help !
Ask
    pecten's Avatar
    pecten Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2008, 11:23 AM
    Honda 3011 riding mower transmission.
    I have a Honda 3011 riding mower that starts but won't go into gear or turn the blade. All belts appear OK and oil is fine. Is the transmission likely ruined?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 4, 2008, 08:10 PM
    The trans should not have anything to do with the blades.
    tonyhonda3011's Avatar
    tonyhonda3011 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 27, 2008, 05:12 PM

    Hello it appears to me you have a belt problem you may have one on incorrectly for when you engage the mower it should engage abelt to drive the blades check belt diagram first.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda 3011 Riding Mower [ 4 Answers ]

We have been given this mower. It runs good, but we would like to know how to raise the blade so that it does not mow so close.

Honda 3011 Hydrostatic Riding Lawnmower [ 4 Answers ]

My 3011 Lawnmower has been setting in the garage for some time and needs a new battery to run, but it won't roll in nuetral. Can you tell me what needs to be done. I know nothing about it.

Riding mower transmission won't engage [ 2 Answers ]

I have a Scott's by John Deere 1742 riding mower. The transmission is not engaging. I have checked the drive belt and it seems to be in OK shape. I noticed a plug loose that appears to attach to a device on top of what I believe to be the gear box. Could this part be bad and causing the mower not...

AYP Riding Mower Transmission [ 1 Answers ]

Hi; I have 42" deck AYP riding mower. Today it started jerking when putting it in gear and not wanting to go forward unless I hold the brake slightly depressed. I took the back plate off and noticed that the drive pulley was real wobbbly. Is this cause by a bad bearing or shim and is it repairable...

View more questions Search