Ask Experts Questions for FREE Help !
Ask
    Tdilawri's Avatar
    Tdilawri Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 6, 2008, 07:03 AM
    Grease type stains on dark clothes after washing and drying.
    I have a Kenmore Elite He3 and sometimes the dark clothes come out with a grease type mark on them after being washed. I have cleaned the washer with CLR but it did not make any difference. Does anyone know why I am getting these marks on my clothes? How can I prevent this? I am using only He approved detergent and with darks I was in cold water.
    robbieali's Avatar
    robbieali Posts: 1, Reputation: 1
    New Member
     
    #2

    Jan 23, 2011, 03:56 PM
    We have the same machine and the same problem. We've placed all kinds of service calls with Sears as well as inependent appliance repair companies and no one can find anything wrong with the washer. We've even called kenmore and they are useless. We are at our wits end.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Grease and oil stains [ 1 Answers ]

How would I get grease and oil stains from my leaking vehicle out of my asphalt driveway

Grease spots on clothes [ 1 Answers ]

My initial inquiry was: "I have a Kenmore washer. Why am I getting black spots on my clothes?" The reply was that I should take the drum out and clean it. My reply to that is: In all my years of using a washer, I have never heard of anyone having to clean the washer or dismantle it to clean...

Getting rid of stains on clothes [ 10 Answers ]

Sirs, How to I get a furniture varnish stains out of clothes.

Stains in clothes [ 1 Answers ]

I have a whirlpool top load (american) washing machine 1 year old. The darks have rust stains and I have damaged garments . Have you any advice on what could be the problem? The whites are not soiled .

What Type of Grease Do I need/use? [ 1 Answers ]

I have an old Delco Heat Gas Furnace Model # GF -80 Gas Input is 100,000, and the BTU input is 80,000. The blower motor was not working. I put a new motor in and the belt spins but it's not kicking out the heat. I looked in there and the fan that is connected to the belt has what looks to be 2 {1...


View more questions Search