Ask Experts Questions for FREE Help !
Ask
    Kyle5000's Avatar
    Kyle5000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 2, 2008, 12:02 PM
    Bauknecht (whirlpool) gsfk1588 dishwasher, F7 code
    Hello,


    My Bauknecht dishwasher has been giving an F7 code within the first couple minutes of the wash. I've cleaned the filter and checked the inlet and outlet hoses and they are flowing okay. I'm not sure how to reset it other than to turn off the power? Does anyone have any recommendations?? Thank you!
    Guinness683's Avatar
    Guinness683 Posts: 25, Reputation: 3
    New Member
    		  
    #2

    Sep 12, 2008, 12:26 PM
    F7 error indicates a fault with the water flow meter, not usually user repairable
    exbomajoch's Avatar
    exbomajoch Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 28, 2008, 02:29 PM
    If you have checked the sump filter at the bottom of the dishwasher, then close the door and turn on the power. Then hold the start button with the + and - buttons under the LCD, until the drain pump starts. This should then reset the dishwasher. (this works with my dishwasher (gsf 4751)

    Good Luck!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Code for dishwasher air gap [ 3 Answers ]

Can anyone help me find out if Texas requires a dishwasher air gap, or if a high loop is all that is required?

Dishwasher code [ 1 Answers ]

I have a whirlpool dishwasher and I want to know how I can reset the code can you help

Whirlpool dishwasher [ 1 Answers ]

I have a new Whirlpool Dishwasher model DU1055XTSQ which I have only had for about one month. It has been installed for three weeks. It has not been drying the dishes and silverware properly. The service attendant has been here twice. He called Whirlpool service and they instructed him to open the...

View more questions Search