Hello,


My Bauknecht dishwasher has been giving an F7 code within the first couple minutes of the wash. I've cleaned the filter and checked the inlet and outlet hoses and they are flowing okay. I'm not sure how to reset it other than to turn off the power? Does anyone have any recommendations?? Thank you!

F7 error indicates a fault with the water flow meter, not usually user repairable

If you have checked the sump filter at the bottom of the dishwasher, then close the door and turn on the power. Then hold the start button with the + and - buttons under the LCD, until the drain pump starts. This should then reset the dishwasher. (this works with my dishwasher (gsf 4751)

Good Luck!