Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installed digital therm. Won't cool
[ 1 Answers ]
I installed a digital thermostat and the heat works, but the cool doesn't! Is it wiring?:mad:
Add on furnace blowers and therm.
[ 1 Answers ]
I have a existing gas fired forced air furnace and am getting a add on wood furnace. I plan on leaving my gas furnace about 10 degrees lower than the wood thermatat. My wood furnace has its own blower but I think I would like to turn my gas blower on also when the plenum gets hot on the wood burner...
Trying to inatsll prog thermostat
[ 1 Answers ]
I am installing a honeywell prog. Thermostat model rth7000. All of the terminals match the old one with the exception... old one has white wire going to terminal x, the new one does not have a x terminal. Where do I put the white wire on the new one?. tanks!
No power in therm unit
[ 8 Answers ]
Hi, I need help fixing ac unit. I called the help desk for my Hunter thermostat and they had me try and start the fan using a metal paper clip. The problem before I did that was that it wasn't starting. There was power but it wasn't regulating the temp. Well in the process I cause a shortage...
Prog. Thermostat
[ 2 Answers ]
I have 2 international comfort products on my roof Model phad60nik6 Pymc60g6 Serial g043630974 I had a prog. Therm. Installed by a licensed air co.; model 44360 There are 6 wires coming from the walls Green, red, orange, white, yellow, and blue View more questions Search
|