Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Metal Roof Construction
[ 8 Answers ]
A contractor is putting on a metal roof for me but I have an issue I hope someone can answer I have a hip roof(4sided roof that meets as a common peak)... The metal where the roofs meet at each of the four corners have gaps running from the bottom of my roof to the top.. They say the ridge...
Roof/shingles or metal
[ 1 Answers ]
I have a roof that drops 9 inches in 13 feet. Can I use regular shingles instead of rolled roofing? If I go with metal panels,can I fasten them right to the new felt or do I need the 3/4 inch strips. ...
Porch roof ridge beam dripping sap
[ 4 Answers ]
Folks, About 4 years ago our house went through a renovation project which included a new screened-in porch. The porch is post and beam construction, of cedar wood. We noticed this spring, for the first time ever, sap drippings on the table and chairs on the porch. The sap is dripping from...
Rolled tar roof leaks on porch, any solutions?
[ 7 Answers ]
We have a built-on porch (to the detached garage) put on in the 60's by the previous owner. The roof is tar, flat, and now it is leaking badly. A handyman put some tar stuff on it once or twice and that helped, but only momentarily. Do we have no option but to bring this porch down? Can a flat...
100 yr old metal roof
[ 2 Answers ]
Hi Folks - I have a 100 year old metal roof. It's rusty but the metal is thicker than what they use now and there are no holes or areas where the rust is by any means close to eating through the metal. I have been told by a few roofers that I need a whole new roof. I thought there might be a... View more questions Search
|