Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hydrotherm Hot Water Boiler
[ 2 Answers ]
I have a 1974 Hydrotherm hot water boiler Model HC85 that uses a millivolt gas valve and an Auqastat to control the circullating pump. My problem is that lately if the boiler is not used for a day or longer because no heat is required I have to jump start the boiler when it calls for heat by...
Leaking Water Boiler
[ 4 Answers ]
We have an oil burner which heats water for the central heating system in our house. This boiler also heats water in an Amtrol Boilermate hot water heater for the potable hot water system. I turned off the water supply to the house at the main to perform a plumbing repair and the boiler leaked a...
Hot Water Boiler
[ 2 Answers ]
Hi first time user on this sight I hope this question makes sense. Can anyone tell me what is happening with my hot water boiler? Recently it seems that our thermostat has no control over the amount of heat that goes through our hot water heating pipes. I replaced the thermostat, but does not seem...
Water Hammer on Hot water loop of Steam Boiler System
[ 3 Answers ]
We have a steam boiler that provides steam for most of the house but also has a hot water loop for the additions. We have been getting a lot of water hammer and it sounds as if it is coming from the area where the first hot water radiator starts (ie it is from the hot water loop). Does anyone...
Boiler Hot Water Insufficient
[ 1 Answers ]
I have a 6 zone hot water / forced air hybrid heating system. Most of the actual baseboard system is 1958/1980, but works fine. In 2000 I put in a new boiler, AC, and a forced air furnace that gets its heat from hot water flowing through it from the boiler (in addition to the zones). I also have... View more questions Search
|